The walkway made with hot-dip galvanized products

H Metal delivered such hot-dip galvanized products for a milk factory. Here the decision was made to build a footbridge (technical bridge).  This allows access from one place to another over the existing installations. To facilitate access to areas where existing installations would normally have to be bypassed.

Thus, a project for the construction of this technical bridge was executed, for which galvanized rectangular pipes and galvanized angles were requested.

The designer decided that the supporting frames/frames of the galvanized grills should be made of galvanized rectangular pipe 60 x 40 x 3 mm. The galvanized pipe was cut at an angle of 45 degrees to be joined by welding in a rectangular shape.

Also, in the calculation of the resistance of the project, a zinc-plated corner with unequal sides was introduced. From which supporting and stiffening elements of the metal structure / walkway were executed. These elements were made of hot-dip galvanized uneven angle 50 x 30 x 4 mm.

Hot-dip galvanized products – their processing and benefits

These products bring economic and time benefits to our customers.

The products were debited to the final form requested by the beneficiary. After which they were introduced into the molten zinc bath. They were covered with a protective layer of zinc in order to prevent rust. The galvanization of these products is necessary, because it is a factory in the food field and because this metal structure is going to be in an environment with a lot of moisture.

Steel is an extremely versatile metal, which plays an important role in our modern life, being used since the construction of buildings. Being also used in the construction of transport systems. Although it has many benefits, a disadvantage of steel is that under the action of moisture, oxygen and salts it can be affected by corrosion.  Zinc plating is one of the best methods of combating the phenomenon of metal corrosion.

H Metal delivers, throughout the country as well as on the territory of the European Union. Manufactured products with standard and/or atypical dimensions.